
N35.150(T) Tipper
4×2 rigid chassis cab with twin rear wheels and tipper body






Dimensions (mm) | ||
---|---|---|
Overall Length | OAL | 5150 |
Overhang - Front | FOH | 1100 |
Cab Gap | CB | 130 |
C/L Front Axle to Rear of Cab | CA | 463 |
Chassis Frame Width | 1700 | |
Cab Width | OW | 1770 |
Overall Height (Unladen) | OH | 2150 |
Chassis Height (Unladen) | EH | 725 |
Minimum Road Clearance | HH | 195 |
Track - Front | AW | 1475 |
Track - Rear | CW | 1425 |
Rear Axle Width | BW | 1855 |
Overall Vehicle Width | OVW | 1950 |
Weights (kg) | ||
---|---|---|
Cab type | day | |
Wheelbase | WB | 2750 |
Vehicle Mass Unladen | Front | 1608 |
Rear | 910 | |
Total | 2518 | |
GVW | 3500 | |
Max. Permissible Trailer Weight | 3500 | |
Payload Allowance (Body & Payload for Chassis Cab) | 982 |

Mechanical Specification
Engine
Engine 4JJ1-E6-D Isuzu turbo intercooled DOHC 4 cylinder diesel with DPD & SCR
Bore: 95.4mm
Stroke: 104.9mm
I
Transmission
5-speed synchromesh MYY5A overdrive
Ratios:
1st 5.315
2nd 2.908
3rd 1.558
4th 1.000
5th 0.721
reverse 5.068
Rear Axle Ratio: 3.909:1
Clutch
300mm diaphragm type with hydraulic actuation
Power & Torque
375Nm at 1600-2800rpm
Electrical
2 × 12V 540CCA 70Ah battery (24V) with 50 Amp alternator.
Tyres/Wheels
Tyes: 205/75 R16 radial.
Wheels: 5.50J × 16, 5-stud.
Spare: 1 × wheel and tyre.
Frame
Parallel ladder type channel section straight side rails, riveted upper flange
Axles
Front: Reverse Elliott I-Beam
Rear: Banjo fully floating
Suspension
Front: Semi elliptical alloy steel springs with hydraulic shock absorbers and anti roll bar.
Rear: Semi elliptical alloy steel springs with hydraulic shock absorbers.
Brakes
System: Vacuum servo assisted hydraulic dual line with ABS, EBD, EVSC, ASR. Exhaust brake
Front: 293mm ventilated discs with asbestos-free pads
Rear: 275mm ventilated discs with asbestos-free pads
Park: Mechanical drum brake rear of transmission
Fuel Tank
Capacity: 57 litres
AdBlue: 16 litres
Cab exterior
Hexapod design white all-steel
Chrome tadiator grille
Manual tilt to 45 deg
Tinted windscreen
Plastic resin non-slip entry steps
90 deg. opening doors
Zinc galvanised frame structure
Steel reinforced composite front bumper with fog and daytime running lamps
Two halogen head lamps with indicators
Front mudguards with spray suppression
Cab interior
Flame resistant interior trim
Vinyl floor matting
Pillar mounted entrance grab handles both sides
SRS airbags driver and passenger
Seats
Driver’s fully adjustable suspension seat with head restraint
Dual split passenger seat with folding back
Driver and outer passenger retractable diagonal seat belts, with pre-tensioner
Centre seat lap belt
Vision
Large foldable door mirrors
Interior rear view mirror on collapsible mounting
Driver and passenger sun visors
Deep cut side windows to reduce blind spots
Electric windows with driver control and lock
Steering
Recirculating ball type with full integral hydraulic power assistance
Tilt and telescopic steering column
Instruments
Speedometer with odometer and trip
Rev counter
Fuel gauge
Engine coolant temperature
Multi information display provides data on servicing, emissions and fuel economy
Switches & Electrical
Combination stalk incorporating headlamps, indicators, fog lamps, washers and wipers, and exhaust brake
Steering wheel horn
Engine idle control
Headlamp levelling
Engine quick warm up
Cigarette lighter
Reverse warning
DPD, EVSC and ASR
Hazard warning lights
Kenwood DAB Radio with Bluetooth
(Sat Nav option available)
Warning/indicator lamps
Battery charge
Oil pressure
Low fuel
Glow plug operation
High beam and indicators
Parking brake on
Fuel/water separator
Check engine
DPD operation
Engine over heat
Adblue level
ABS
SRS/airbag
Exhaust brake operation
Front and rear fog
Seatbelt warning
Brake fluid level
Brake vacuum loss
Tool Kit
Jack, with a small selection of hand tools
Safety Features
R29 cab strength: complies with ECE-R29 cab strength standard.
Central Locking: Central locking with remote keyless entry ad immobiliser.
Rear bumper: Alloy rear under run bar
Seat-belts: Red diagonal and lap belts
Warranty
All chassis cabs come with a 3 year unlimited mileage warranty and roadside assistance as standard. Tipper bodies all come with the bodybuilder’s 3 year, 100,00 mile warranty. Terms and conditions apply.
Repair and Maintenance
Isuzu-backed repair and maintenance contract available upon request.